Free cookie consent management tool by TermsFeed Cookies
Split Phase Inverter
Home - Inverters - Split Phase Inverter
6000w 48v hybrid solar inverter split phase 120 240vac  
6000w 48v hybrid solar inverter split phase 120 240vac  
3000 watt split phase inverter 
12000 watt inverter charger 48 volt 120 240vac
split phase inverter
hybrid solar inverter
inverter charger

48V Hybrid Solar Inverter Split Phase 120 240VAC 3000 Watt - 12000 Watt

Input Voltage: 48VDC | Output Voltage: 110V/220VAC or 120V/240VAC ± 2% | Efficiency: ≥85% | Type: Off Grid Split Phase Pure Sine Wave Inverter

1 : The hybrid solar inverter supports split phase voltage output and input 110V 220VAC or 120V 240VAC

2 : Support split phase and single phase input function

3 : Support built in MPPT solar charge controller to maximize solar tracking

4 : Built in low loss transformer with low frequency, pure sine wave output, stable output

5 : Support solar energy, grid power and diesel gasoline generator charging to meet the needs of various scenarios

6 : Strong battery compatibility, such as

Produt Details Download

About LU Series Split Phase Hybrid Solar Inverter

 

Xindun's LU series hybrid solar inverter not only supports voltage split phase output, but also supports single phase and split phase input. Some countries support the use of two voltages, such as Mexico, Colombia, Vietnam, Brazil and other American regions. Our split phase inverter is 48V DC to 110V/220VAC or 120V/240VAC, and the power can be selected from 3000W, 4000W, 5000W, 6000W, 8000W, 10000W and 12000W. It can fully cover residential, small industrial and commercial, communication base stations and other scenarios, and meet the power needs of 120V and 240VAC equipment, such as refrigerators, TVs, lamps, air conditioners, water pumps, power tools, etc. Compared with traditional single phase inverters, split phase inverters have stronger load capacity. Our split phase hybrid solar inverter is equipped with an efficient MPPT solar charge controller, which accurately tracks the maximum power point of solar power and comprehensively improves the system charging efficiency. At the same time, it has a lithium battery BMS communication interface, which can monitor the status of the battery and inverter in real time through the lithium battery tracking function, reduce battery loss, and extend battery life.

 

LU series is a split phase hybrid solar inverter that combines stability, reliability and advanced technology to meet the needs of various power projects.

6000w 48v hybrid solar inverter split phase 120 240vac

3000 watt split phase inverter wiring

3000 watt split phase inverter built  in MPPT solar controller

low frequency 3000 watt split phase inverter

BMS 12000 watt inverter charger 48 volt 120 240vac

12000 watt inverter charger 48 volt 120 240vac charging mode

12000 watt 3000 watt split phase inverter charger suitable market

Xindun's LU series split phase hybrid inverter has built in low los frequency transformer, which has stronger impact load capacity and anti interference ability. It can easily drive high power inductive equipment such as air conditioners, water pumps, power tools, etc., and is suitable for residential and small commercial applications in Latin America.

 

Split Phase Hybrid Solar Inverter Datesheet

 

The rated power, voltage, phase, frequency, etc. of the inverter affect the overall efficiency and operation of the entire solar system. It is necessary to select an inverter that meets the appropriate national electricity standards based on the actual power demand and load. Through the LU series split phase hybrid solar inverter parameter table, you can have a deep understanding of the inverter's working mode, input/output voltage, battery type and other specifications, and select  suitable inverter.

Specification

Model: LU/LUT

30248

40248

50248

60248

Rated Power

3000W

4000W

5000W

6000W

Peak Power(20ms)

9000VA

12000VA

15000VA

18000VA

Start Motor

3HP

3HP

4HP

4HP

Battery Voltage

48VDC

Max AC charging current

15A

20A

25A

30A

Size(L*W*Hmm)

462*300*148

522*335*158

Packing Size(L*W*Hmm)

545**385*223

605*420*233

N.W.(kg)

 

 

 

 

G.W.(kg)

 

 

 

 

Installation Method

Wall-Mounted

Parameter

Input

DC Input Voltage Range

42-60VDC

AC Input Voltage

220VAC/240AC (split phase L1-N-L2) or 110V/120AC (single-phase L1-N)

AC Input Voltage Range

Split phase: 170VAC~275VAC (220VAC)/190VAC~295VAC (240VAC) or single-phase: 85VAC~138VAC (110VAC)/95VAC~148VAC (120VAC)

AC Input Frequency Range

45Hz~55Hz(50Hz) / 55Hz~65Hz(60Hz)

AC charging method

Three-stage (constant current, constant voltage, floating charge)

Output

Efficiency(Battery Mode)

≥85%

Output Voltage(Battery Mode)

L1-N/L2-N:110VAC or 120VAC ; L1-L2: 220VAC or 240AC

Output Frequency(Battery Mode)

50/60Hz±1%

Output Wave(Battery Mode)

Pure Sine Wave

Efficiency(AC Mode)

>99%

Output Voltage(AC Mode)

L1-N/L2-N:110VAC or 120VAC ; L1-L2: 220VAC or 240AC

Output Frequency(AC Mode)

Follow input

Output waveform distortion
(Battery Mode)

≤3% (Linear load)

No load loss(Battery Mode)

≤0.8% rated power

No load loss(AC Mode)

≤2% rated power(charger does not work in AC mode)

No load loss
(Energy saving Mode)

≤10W

Battery Type
(selectable)

VRLA Battery

Charge Voltage :56.8V; Float Voltage:55.2V

Customize battery

Charging and discharging parameters of different types of batteries can be customized according to user requirements
 (charging and discharging parameters of different types of batteries can be set through the operation panel)

Protection

Battery undervoltage alarm

Factory default:  44V

Battery undervoltage protection

Factory default:  42V

Battery overvoltage alarm

Factory default:  60V

Battery overvoltage protection

Factory default:  64V

Battery overvoltage recovery voltage

Factory default:  58V

Overload power protection

Automatic protection (battery mode), circuit breaker or insurance (AC mode)

Inverter output short circuit protection

Automatic protection (battery mode), circuit breaker or insurance (AC mode)

Temperature protection

>90°C(Shut down output)

Inside Solar controller
(Optional)

Charging Mode

MPPT

Charging Current

60A

100A

PV Input Voltage Range

60V-140Vdc

Max PV Input Voltage(Voc)
(At the lowest temperature)

180V

PV Array Maximum Power

3360W

5600W

 

MPPT Tracking Channels/Input Channels

1

Working Mode

Battery First/AC First/Saving Energy Mode(can be set)

Transfer Time

≤4ms

Display

LCD

Thermal method

Cooling fan in intelligent control

Communication(Optional)

RS485/APP(WIFI monitoring or GPRS monitoring)

Environment

Operating temperature

≤55dB

Storage temperature

-10℃~40℃

Noise

-15℃~60℃

Elevation

2000m(More than derating)

Humidity

0%~95% ,No condensation

Note: All specifications are subject to charge without prior notice

 

 

Split Phase Hybrid Solar Inverter Supplier

 

Xindun is a professional manufacturer of hybrid solar inverters, headquartered in Foshan, China. Our products are sold to more than 100 countries around the world. We have been in Latin America for many years and many countries (including Mexico, Colombia, and parts of the Caribbean) use split phase 120V/240V electrical systems for residential and small commercial installations. We have a deep understanding of the needs of the solar energy market in Latin America and help distributors, wholesalers, project companies and other customers to conduct business. Our split phase solar inverters are widely used in the Americas with the function of split phase voltage input and output, and the market potential is huge.


hybrid solar inverter company

Split Phase Hybrid Solar Inverter Factory

 

Xindun has a modern production plant of more than 10,000 square meters, 10 semi automatic production lines, 4 assembly lines, daily output of 1,200 units and more than 100 production employees. In order to ensure that the products received by customers are of high quality, all products undergo 4 strict tests and commissioning before delivery. The entire process from production to packaging and delivery is carried out in accordance with strict standards to ensure stable product performance and reliable quality, providing solid protection for global distributors and project customers.

 

split phase inverter charger workshop

 

Xindun and Our Solar Energy Partners

 

Xindun actively participates in major international solar exhibitions around the world every year, and has face to face exchanges with many industry experts and customers through offline exhibitions to share our advanced production technology and solar products, enhance international influence, and further develop the solar market. We have reached a long term cooperation agreement with customers at the exhibition, and our hybrid solar inverter products have been widely promoted.

 

Xindun with cooperation partner

 

 

Split Phase Hybrid Solar Inverter Certifications

 

All Xindun inverter chargers are manufactured in strict accordance with international power standards and have obtained international authoritative certifications such as CE, TLC, and CCC, and are safe and reliable.

 

Hybrid solar inverter charger certification

 

WeChat

loading